The purpose of face recognition is access control but for access control, you can use cards also, without face recognition. We have a solution with Digital Detection Module, it is not the camera, but it is access control station with terminal Digital Detection Module, which has Measurement Accuracy 0.1℃, not depends on the blackbody existing. The purpose of face recognition is access control but for access control, you can use cards also, without face recognition. We have a solution with Digital Detection Module, it is not the camera, but it is access control station with terminal Digital Detection Module, which has Measurement Accuracy 0.1℃, not depends on the blackbody existing. The purpose of face recognition is access control but for access control, you can use cards also, without face recognition. We have a solution with Digital Detection Module, it is not the camera, but it is access control station with terminal Digital Detection Module, which has Measurement Accuracy 0.1℃, not depends on the blackbody existing. We will not accept the device with deviation of 0.5.

1) shall all 14 pcs be installed on the wall or tripod is required? No additional tripod is required, in some colleges it will be installed on the wall and some buildings of colleges require to stand it in the entrance. 2) ho far turnstile and/or access control system control panels will be located from device? access control system control panels and temperature module is the same/one equipment, This system does not have a separate control system. It will be connected directly to the network. 3) are there existing cable channels for connection control panel and recognition device? There is not existing cable channels for connection control panel and recognition device, but it could be made. Equipment needs a connection with a network and power supply (it exists). 4) Hello, who will upload pictures, operator or installer company? Operator will upload pictures

1. What is purpose of face recognition? actually using biometric data (face) is restricted to certain applications by Georgian Law For personal Data Protection and GDPR The purpose of face recognition is access control but for access control, you can use cards also, without face recognition. We have a solution with Digital Detection Module, it is not the camera, but it is access control station with terminal Digital Detection Module, which has Measurement Accuracy 0.1℃, not depends on the blackbody existing. 2. Unfortunately your reply is not clear Unfortunately some irresponsible manufacturers indicate measurement deviation of 0.3 degree that is unreachable with out of use of blackbody calibrators, that are not applicable to terminal systems, so is it possible to extend deviation value requirement to realistic one suitable for such devices - 0.5 degree so that equipment of manufacturers indicating adequate values could fit into tender specifications? - 0.3 degree is acceptable as it is indicated in specification. Question is whether you will accept devices with deviation of 0.5 according to datasheets? We will accept the device with deviation of 0.5.

1) shall all 14 pcs be installed on the wall or tripod is required? No additional tripod is required, in some colleges it will be installed on the wall and some buildings of colleges require to stand it in the entrance. 2) ho far turnstile and/or access control system control panels will be located from device? access control system control panels and temperature module is the same/one equipment, This system does not have a separate control system. It will be connected directly to the network. 3) are there existing cable channels for connection control panel and recognition device? There is not existing cable channels for connection control panel and recognition device, but it could be made. Equipment needs a connection with a network and power supply (it exists).

We don’t require any racks.

It will be connected separately through the intranet of colleges, it won’t be centrally managed. There is no need on four door controls and we cannot provide the information about the brand.

Hello, we have some questions for you: 1. Do you need an embedded software or SQL? The equipment must have an appropriate software. 2. Do you already have an existing system and you want to expand with Face Recognition devices, or it is a new installation? This is the new installation.

1. ყველა კოლეჯს აქვს ელექტრუნულო მონაცემთა ბაზა, რომელიც ჩაიტვირთება და აპარატმა უნდა დააიდენტიფიციროს, 2. შესაბამისად, ბაზას აპარატი თავად არ ქმნის, უცხო ადამიანს სურათს უღებს და ინახავს, შემდეგ ოპერატორმა ეს სურათი უნდა მიაბას ბაზას და გაწეროს ვინ არის ეს პერსონა და მისცეს შესაბამისი უფლებები.

Kindly clarify installation environment and temperature range in areas of installation, as those factors affect performance and compliance to specification of devices a lot. - Device should be a Face Recognition Thermal Screening Terminal, recommended for the indoor use. Does devices need any mounts or power supply adaptors? It is not indicated. Are there any requirements for recording, logging ,reporting, alarming, mask detection/alarming, etc - It should include stand and power supply. Unfortunately some irresponsible manufacturers indicate measurement deviation of 0.3 degree that is unreachable with out of use of blackbody calibrators, that are not applicable to terminal systems, so is it possible to extend deviation value requirement to realistic one suitable for such devices - 0.5 degree so that equipment of manufacturers indicating adequate values could fit into tender specifications? - 0.3 degree is acceptable as it is indicated in specification. As for the installation, it is not included in tender document, colleges will provide the installment themselves.

1) Are you looking for a Bullet Camera or Tablet solution? Access Terminal with face recognition and temperature measurement 2) All the quantity 14 pcs, are they in 1 location or many locations? different locations: Batumi, Kobuleti, Poti, Tbilisi, Saguramo, Akhaltsikhe, Kachreti, addresses will be provided later. 3) UPS needs to be central (1 pcs) or for each system? for each system 4) How the overall access control will be managed, what is the exact requirement? ( from 1 server or each of them will be different) each of them different 5) Do you accept cloud management or an on-premise management system? on-premise 6) What kind of access control will be managed, i.e. door? access tourniquet 7) What do you mean Card Capacity? internal storage of the device to store face and reports 8) What kind of installation location (how is the background)? in the entrance of building 9) Do you need face recognition with MASK? In case of need, we can provide it. - optional but advantage.